p0304 cylinder 4 misfire error code and P0106 MAP/Barometric

Got a problem? Post in here for help.

p0304 cylinder 4 misfire error code and P0106 MAP/Barometric

Postby MEGAMAN69 » Wed May 26, 2010 8:24 am

I recently bought a used saturn ION. Everything was working great until i changed out the plugs. I bought new plugs Installed Everything sounded great after that. But When i drove it home from where i did the work at i noticed some very little pops coming out the exhaust.. not very loud pops but little small ones. Also when i have the engine hood open and have my hand on the engine it jumps a little when the little pops happen. 1 thing i never felt right about when changing the plugs was The coil pack seating correctly when i put it back on ... are u suppose to hear a pop when u slip the boots on? I know something is wrong as a whole because the car just doesnt perform like when i bought it and the sparkplugs are in there trust me so it has be the coil boot i think im just not sure. Im also getting P0106 MAP error code but i think that is because the cylinder 4 is not firing right so its not getting good pressure in the manifold. IF it was cylinder 4 injector you would get a different error code right?
Last edited by MEGAMAN69 on Wed May 26, 2010 8:32 am, edited 1 time in total.
MEGAMAN69
 
Posts: 8
Joined: Wed May 26, 2010 8:13 am

Re: p0304 cylinder 4 misfire error code and P0106 MAP/Barometric

Postby MEGAMAN69 » Wed May 26, 2010 8:25 am

sorry forgot to mention it is a 2005 Saturn Ion-2
MEGAMAN69
 
Posts: 8
Joined: Wed May 26, 2010 8:13 am

Re: p0304 cylinder 4 misfire error code and P0106 MAP/Barometric

Postby 06_ion2 » Wed May 26, 2010 8:44 am

What kinda plugs did you put in?
Image
User avatar
06_ion2
Moderator
 
Posts: 7563
Joined: Fri Jan 05, 2007 6:17 pm
Location: Big lake, MN

2006 Saturn ION 2

Re: p0304 cylinder 4 misfire error code and P0106 MAP/Barometric

Postby elecblue06 » Wed May 26, 2010 9:13 am

06_ion2 wrote:What kinda plugs did you put in?



i'm going to go out on a limb and say probably platinum
Image
User avatar
elecblue06
Donating Member
 
Posts: 7248
Joined: Mon Mar 19, 2007 9:39 pm

2006 Saturn ION 3

Re: p0304 cylinder 4 misfire error code and P0106 MAP/Barometric

Postby MEGAMAN69 » Wed May 26, 2010 10:41 am

I put denso platnium plugs but i only had them in for like a week then i switched them out and put acdelco iridums. is putting platnium plugs bad??? :P thats what i thought the problem was so i switched back to OEM acdelco and still have this probelm
MEGAMAN69
 
Posts: 8
Joined: Wed May 26, 2010 8:13 am

Re: p0304 cylinder 4 misfire error code and P0106 MAP/Barometric

Postby elecblue06 » Wed May 26, 2010 10:56 am

MEGAMAN69 wrote:I put denso platnium plugs but i only had them in for like a week then i switched them out and put acdelco iridums. is putting platnium plugs bad??? :P thats what i thought the problem was so i switched back to OEM acdelco and still have this probelm


coil pack could be fucked but yes platinum is bad
Image
User avatar
elecblue06
Donating Member
 
Posts: 7248
Joined: Mon Mar 19, 2007 9:39 pm

2006 Saturn ION 3

Re: p0304 cylinder 4 misfire error code and P0106 MAP/Barometric

Postby MEGAMAN69 » Wed May 26, 2010 11:04 am

well i didnt run the platniums that long in the car.. im thinking its the coil pack too but if the coil pack was fucked wouldnt all the cylinders be fucking up?
MEGAMAN69
 
Posts: 8
Joined: Wed May 26, 2010 8:13 am

Re: p0304 cylinder 4 misfire error code and P0106 MAP/Barometric

Postby Hemken » Wed May 26, 2010 12:58 pm

Get rid of those plugs!
Image

Image
User avatar
Hemken
 
Posts: 1826
Joined: Fri Jan 05, 2007 7:01 pm
Location: Shawano, Wisconsin

Re: p0304 cylinder 4 misfire error code and P0106 MAP/Barometric

Postby MEGAMAN69 » Wed May 26, 2010 12:59 pm

Hemken wrote:Get rid of those plugs!

the ones i have now??? there the oem ac delco....
MEGAMAN69
 
Posts: 8
Joined: Wed May 26, 2010 8:13 am

Re: p0304 cylinder 4 misfire error code and P0106 MAP/Barometric

Postby MEGAMAN69 » Wed May 26, 2010 1:12 pm

where is the map sensor on the car maybe i will just replace that??
MEGAMAN69
 
Posts: 8
Joined: Wed May 26, 2010 8:13 am

Re: p0304 cylinder 4 misfire error code and P0106 MAP/Barometric

Postby Hemken » Wed May 26, 2010 1:23 pm

MEGAMAN69 wrote:
Hemken wrote:Get rid of those plugs!

the ones i have now??? there the oem ac delco....


Sorry still thought you had the platniums in. lol
Image

Image
User avatar
Hemken
 
Posts: 1826
Joined: Fri Jan 05, 2007 7:01 pm
Location: Shawano, Wisconsin

Re: p0304 cylinder 4 misfire error code and P0106 MAP/Barometric

Postby MEGAMAN69 » Wed May 26, 2010 1:32 pm

Hemken wrote:
MEGAMAN69 wrote:
Hemken wrote:Get rid of those plugs!

the ones i have now??? there the oem ac delco....


Sorry still thought you had the platniums in. lol

nope had them in for a week and then went to the ac delcos... so I dont know what to do... im not sure if the MAP code is setting off the misfire and maybe i just need to replace the map sensor... do you know where it is on the 2005?
MEGAMAN69
 
Posts: 8
Joined: Wed May 26, 2010 8:13 am

Re: p0304 cylinder 4 misfire error code and P0106 MAP/Barometric

Postby DSLaBuda » Wed May 26, 2010 5:25 pm

Before you start throwing parts at the problem, did you pull the coilpack back off to see if something was f'd up with #4's boot?
-DS a.k.a. "Yeah, I got that schematic."

"I am a product of my environment, so don't blame me I just work here but I wanna @#$% it all up!" Offspring - Americana

"Send lawyers, guns, and money...the shit has hit the fan" - Warren Zevon

"Saying java is good because it works on all platforms is like saying anal is good because it works on both genders"

Image

Our cause: http://www.facebook.com/group.php?gid=130818900285171
User avatar
DSLaBuda
 
Posts: 1385
Joined: Tue Jan 30, 2007 2:04 pm
Location: Saint John, Indiana

2005 Saturn ION 1

Re: p0304 cylinder 4 misfire error code and P0106 MAP/Barometric

Postby MEGAMAN69 » Wed May 26, 2010 8:58 pm

no not really what are some things to look for?
MEGAMAN69
 
Posts: 8
Joined: Wed May 26, 2010 8:13 am


Return to Technical Help and Support



Who is online

Users browsing this forum: Bing [Bot] and 1 guest